7
1. Features
The units of the
Titan Professional
line are automatic machines to control and adjust the water
temperature. They work as heat pumps and switch automatically between heating and cooling to
keep the water temperature in the desired range. The main application will be for cooling down the
aquarium water. But they are also very effective heaters. The Titan 6000 professional has a
heating capacity of 5,200 watts with only 1,400 watts of power uptake.
2. Set-up and installation
1.
The cooling unit must be set up at a well-aerated place
. The complete heat taken out of
the water by the unit and the waste heat of the unit itself are emitted at the unit to the
surrounding air. A build-up of heat directly at the cooling unit leads to a heavily reduced cooling
power output. Therefore, sufficient ventilation is essential.
The environmental temperature should not exceed 35° C
.
2. The cooling unit has to be connected to a closed water cycle. It is recommended to place the
unit below the water surface (max. 2 m below).
3. Switch the water flow on.
It is important that the water flows continuously through the
cooler.
Because the temperature-sensor is placed within the unit, the heat exchanger cannot
freeze in case of a failure of water supply.
4. Before starting, the cooler should stand up straight for at least 1 hour. Connect it to 230 V
power source and switch the unit on (plug in the mains and switch on). Now, the actual water
temperature is shown on the display. Because the thermo sensor is placed in the water inlet,
always a temperature which corresponds to the temperature in the tank is shown.
3. Technical Parameters
Model
Titan
professional
6.000
Titan
professional
8.000
Titan professional
15.000
Power supply
220 – 240 V~
380 V ~, 3 Ph.
Cooling capacity (W)
5,200
7,200
14,900
Heating capacity (W)
5,200
7,200
14,900
Compressor power (HP)
2
3
5
Power uptake : cooling”
1.78
2.34
3.95
Power uptake: heating”
1.4
1.75
2.90
Rated total input current (A)
9.8
12.5
20.8
Recommended flow rate (l/h)
3000 – 12000
4000 - 16000
8000 - 32000
For aquariums up to
∆T = 5°C
∆T = 10°C
6,000 l
3,000 l
8,000 l
4,000 l
15,000 l
7,500 l
Cooling agent
R410
Heat exchanger
Titanium
Diameter of water inlet and
outlet
1.5”
Ambient temperature
5° C - 38° C
Temperature control range
5° C – 25° C
Max. water pressure
≤
0.2 bar
Thermostat default value
Temperature 20° C, difference temperature 2° C
Dimension: L x W x H (mm)
720 x 440 x
678
735 x 460 x
727
850 x 550 x 950
Net weight (KG)
68
78
150
