Inspiring Excellence in Fish Care!
Ensure that your hands and all power cables are dry before
plugging in equipment and turning power on.
*sold separately
Do not plug the heater in unless it
is fully submerged in water.
Install the
heater* near
the filter as
shown.
Fill the aquarium
to no more than
1cm below the
top.
Always treat the
water with a water
conditioner* to remove
harmful chemicals.
Fill Aquarium
>1cm
Place Lid
Place the lid supports by
pushing them onto the glass lid.
Place the lid on the tank.
The lid should allow space at
the back of the aquarium for
the cables of the powerhead,
heater and light fixture.
Install Light
Make sure that your hands and all
plugs are dry before connecting
the power into the bottom of the
light unit.
Tighten
the
screws
enough to secure the
light unit. Take care not
to over tighten them.
Attach the supports to the
light unit and mount it on the
aquarium as shown.
