12
SETTING THE TIME
When turning on the spa for the first time you will need to set the clock time. To
set the clock time the spa must be in Standby mode.
Please ensure the spa is in Standby Mode (---). The three horizontal dashes must be displayed.
Press the
button to enter the time setting mode.
The hour and minutes will begin to flash on the display.
Press the
and
buttons to adjust the time, the time is set in a 24 hour clock.
Once the desired time is selected wait for 5 seconds.
The hour and minutes will remain static once this has completed.
If your spa loses power you may need to reset your time of day and being a digital clock the clock itself can gain or
lose time requiring adjustments to be made.
SETTING THE CYCLE CLEANING
In order to keep your spa clean you need to set the cycle cleaning. This feature will automatically turn on all of
the spas jets temporarily to purge the spas water and then will run the spas filter for the set period of time. You
must run this feature for a minimum of 6 hours every day.
To set the 6-hour cleaning cycle ensure the spa is in Standby Mode (---)
Now press
Now enter the time of day you want the spa to begin the cycle cleaning, using a 24-hour clock.
To adjust the time, press the
and
buttons.
Once you have selected an appropriate time press
Now enter the duration for which you want the spa to cycle clean.
To adjust the duration, press the
and
buttons, you must set at least a 6-hour period
Which will read 6:00
Once you have selected an appropriate duration press
Now press the
button.
This symbol
will now appear on the display panel to indicate that cycle cleaning has been set.
