| 12
When the pump is installed outside, we recommend providing
simple protection against the weather (rain, sun etc.).
Implement appropriate measures to attenuate the noise generated
by the pump to avoid damage to the environment. Fastening the
pump to the foundation should be effected exclusively by means of
bolts, threads or dowels, in order to avoid blocking the removal of
the motor unit! Make sure that there is enough space between the
fan cover and the wall, minimum 60 mm.
We recommend the use of a spiral hose and a hose clamp to
connect the pump to the pool.
The connection to the AQUA splash is
fl
exible and easy to undo
due to the use of nozzles.
Keep the suction line as short as possible. The
pump should be installed horizontally in a dry area.
The AQUA Splash is non-self-priming and must be
installed below the water level (up to max. 3 m).
Suction and pressure lines are to be
fi
tted with shut-
off valves.
WG42.02.207-P
D42.04.208-P
60
mm
D42.02.209-P
D42.02.210-P
Caution
Caution
Caution
