background image

2

Your MakoShark 2, which has been manufactured,

tested and inspected in accordance with carefully
specified engineering requirements, is warranted to be
free from defects in material and workmanship.

DURATION OF WARRANTY AND TO

WHOM EXTENDED (USA only)

One Year ALL GENERAL PARTS

One Year POWER TRAIN WARRANTY
(Motor, Cord and Gear Box).

This unconditional warranty includes both parts

and labor for the periods above noted. This warranty is
available to such first consumer purchaser and mem-
bers of his or her immediate family or household for the
personal household use of the MakoShark 2 by or on
behalf of such first consumer purchaser. 

WARRANTY REQUIREMENTS

The MakoShark 2 is required to be used on electric

current as indicated on the nameplate. Otherwise,
damage, defects, malfunctions, or other failures of the
MakoShark 2 arising from use on electric current not as
indicated are excepted and excluded from this warran-
ty. 

Defects, malfunctions, failure, or damage of the

MakoShark 2 caused by improper, unreasonable, or
negligent use or abuse while in the possession of the
consumer are likewise excluded from this warranty.

Defects, malfunctions, failure, or damage of the

MakoShark 2 due to commercial use are excluded from
this warranty.

If repair is done on your MakoShark 2 by anyone

other than those designated as authorized to perform
such work without first having obtained factory instruc-
tions, Aqua Vac Systems, Inc., at its sole option, may
determine that this warranty will not apply and that
reimbursement for such repair will not be made
because of the failure to comply with such factory
specified instructions.

WARRANTY REPAIR PROCEDURE

To secure repair of the MakoShark 2 or any war-

ranted parts under this warranty, the following proce-
dure should be used. After making prior arrangements
with the facility involved, the inoperable MakoShark 2
or warranted parts, together with two extra photocopies

of satisfactory evidence of the purchase date, must be
delivered, with shipping and delivery charges prepaid,
to the nearest Aqua Vac Systems Factory Authorized
Service Center. If you are unable to locate the forego-
ing, you may call, write, or otherwise communicate with
Aqua Vac Systems, Inc., telephone 1-800-327-0141 for
the nearest location.

Upon compliance with the above procedure, and if

claim is made within one-year from date of purchase,
defective warranted parts will be replaced at no charge
and the machine sent back to you freight collect.

In following the procedures above set forth,

PLEASE MAKE CERTAIN to state the serial number as
shown on the base plate of the MakoShark 2.

REPLACEMENT

In the event of a defect, malfunction, or failure of

your MakoShark 2, or any warranted part to conform
with this warranty, Aqua Vac Systems, Inc. may at its
sole option and own expense, replace the MakoShark
2 or any warranted part with another new or factory
rebuilt identical or reasonably equivalent unit or part in
lieu of repairing the defect.

WARRANTY REGISTRATION CARD

FOR YOUR MakoShark 2 AND

REQUESTS FOR INFORMATION

Please fill out the warranty registration card accom-

panying your MakoShark 2, giving complete informa-
tion as requested on the card and return to the factory. 

Any information or questions you may have con-

cerning your MakoShark 2 or this warranty may like-
wise be secured from the factory. 

No dealer, distributor, or other similar person has

any authority to make any warranties or representa-
tions concerning Aqua Vac Systems, Inc.’s products or
to extend this warranty beyond the express items con-
tained herein. Accordingly, Aqua Vac Systems, Inc.
assumes no responsibility for any such warranties or
representations beyond the express items contained in
this unconditional warranty. This unconditional warran-
ty is valid and enforceable only in the United States of
America on MakoShark 2’s owned and normally oper-
ated in the United States of America. This warranty
gives you specific legal rights, and you may also have
other rights which vary from state to state.

Summary of Contents for Mako Shark 2

















Reviews: