User Manual Thermal X - R Series Chillers
Page 4
INTRODUCTION
Thank you for choosing an Aqua Cooler chiller. In order to use this chiller correctly and efficiently,
please read the following instructions in detail. This manual is designed to explain the installation,
operation and the basic maintenance of the product. It is recommended that for service issues Aqua
Cooler Pty Ltd be contacted before any work commences.
General Information
The chiller is designed to refrigerate and circulate water to a heat developing process to aid in keeping
that process cool. They are supplied with an immersed coiled evaporator, or plate heat exchanger, or
shell&tube evaporator (model dependant), an air-cooled condenser and a rotary or scroll compressor
to circulate the refrigerant gas. Water is circulated out of the unit via a pump. The chiller is designed
to be installed outdoors and refrigerate water for a heat developing process – not for drinking or food
preparation purposes. Any other use of this water chiller is not as it is intended.
Denomination
Chiller Series: Thermal X R Series
Phase: A1:Single-hase | A3: Three-phase
R1200A3-A-CC-CTO
Special Series:
None: Standard Unit
CTO: Close Tolerance
Evaporator Type: CC: Coil in Tank
PP: Plate Pack
ST: Shell&Tube
Refrigerant: A: R134A | C: R407C
Model Number: 150 to 4000
