product settings and troubleshooting
product settings
The pool cleaner will start working as soon as the power supply is plugged
into the wall outlet and the floating cable is plugged into the power supply
socket. The indicator light on the power supply lights up to confirm that the
cleaner is working.
•
To turn the power supply
oFF
while the cleaner is running it’s cycle, press
and release the power
on/oFF button.
The indicator light will turn off.
•
Once the cleaner has finished its cleaning cycle, it will enter a “stand-by”
mode where the indicator light will start blinking. To restart the cleaning
cycle press and release the
on/oFF button
. Should you wish to com-
pletely turn the power supply off, unplug the power cord from the wall
outlet, then unplug the floating cable from the power supply.
tiMer settings / pool siZe
port eXtensions
Figure A
Your cleaner is equipped with two adjustable suction ports on the underside
of the unit. Both can be lowered to maximize the suction strength for picking
up smaller debris. The suction ports are set to the lowest position by default.
To adjust the ports, use your hand to pull or push the extensions into place.
When you hear a click sound, this means the extension is locked into position
and ready. To change again, repeat the same action. (See Figure A to the right)