Replacing Moisture Absorbing Pack
1. Remove dome, turning counter clockwise. Use caution when handling
O-ring to be sure the area remains clean to ensure a water tight seal.
2. Pull off black cap.
3. Moisture absorbing pack will be exposed.
4. Take out moisture absorbing pack and replace.
5. Re-attach black cap.
6. Re-attach dome by lining up the grooves and turning clockwise until it
locks. Use caution when handling O-ring to be sure the area remains
clean to ensure a water tight seal.
Cleaning Dome
Using an acrylic glass cleaner, spray onto surface of dome and rub in
with a microfiber cloth.
Preventing Fogging On Dome
1. Remove dome, turning counter clockwise.
Use caution when handling O-ring to be sure the area remains clean to
ensure a water tight seal.
2.
Spray a small amount of anti-fogging spray on the inside surface of dome.
3. Wipe area with a small cloth until surface is clear.
4. Re-apply as required.
After Water Care
1. Rinse AquaLens with fresh water.
2. Wipe down, using a microfiber lens cleaning cloth.
3. Safely store AquaLens---cover dome to protect from scratches.
10
Maintenance
b
d
