Important Safety Instructions
Assemble and use AquaLens only as instructed by this manual.
Read and follow these important safety instructions and the detailed
assembly in this manual prior to using the Aqualens.
Follow all safety and operational warnings.
Heed all additional restricitons on use.
Refer all non-routine service issues to Aquabotix at www.aquabotix.com
or info@aquabotix.com.
Safety and Operational Warnings
Assemble AquaLens in a safe, dry place. Do not assemble while
submerged in water or allow Aqualens to get wet before it is fully
assembled and enclosed in the watertight dome. Do not assemble with
wet hands.
AquaLens is powered by eight (8) AA Alkaline batteries. Do not use any
other type of battery or powering device for AquaLens. Caution should
be used when inserting or changing batteries.
Do not attempt to insert or change batteries into AquaLens while
submerged in water. Do not let the battery assembly area get wet. Do
not assemble with wet hands.
When using topside power to operate your AquaLens, use caution to
prevent shock or damage.
The AquaLens dome must be completely secured to keep it watertight.
Check the security of the dome before submersion. To tighten, line up
the grooves and turn clockwise until it locks.
The topside box and LCD screen are not waterproof. Do not submerge
the topside box or LCD screen in water. Do not let the topside box or
LCD screen get wet.
1
Legal Disclaimer
