Cura
recessed rainhead
tête de pluie encastrée
37
aquabrass.com
last revision: 22/06/2022
CARE & MAINTENANCE
Do not allow water residues to come into prolonged contact with the surface finish. After each use, gently dry the product surface with a
clean soft cloth to prevent water-spotting and mineral build-up. Water stains and accumulation of minerals weaken the protective coating,
eventually leading to peel off.
Clean the surface regularly using a pH neutral clear liquid soap, water and a soft cloth. Rinse away any traces of soap and gently dry with
a soft clean cloth. Occasional application of Flitz Faucet Wax Plus is also recommended. The application of this wax based product leaves
a protective layer that repels water, thereby providing extra protection against tarnishing.
Avoid abrasive and harsh cleaning products (detergents, caustic, acidic, antibacterial, ammonia- or bleach-containing products, organic
solvents, lime scale and clog removers, brass and silver cleaners, etc.). The use of these products can damage the finish and will void the
warranty. We recommend covering the fixture with a towel when using any of the listed products in order to prevent damage by splashing.
Residues left by personal products such as soap, toothpaste and shampoo can damage the finish. Always rinse these residues away with
clean water and wipe dry.
Due to the characteristics of the Aquabrass custom finishes and their appropriate maintenance durability dependency, the
warranty for custom finish products is three (3) years. There are no returns on custom finish products.
PRODUCT CERTIFICATION
Complying with North American plumbing standards and guaranteeing environmental products of the highest quality is our top priority.
ABOUT
