9
NATIONAL ORGANIZATIONS:
The below organizations have rules for racing model boats
like your UL-1 Superior.
International Model Power Boat Association (IMPBA)
www.impba.net
North American Model Boat Association (NAMBA)
www.namba.com
ORDERING REPLACEMENT PARTS
To order replacement parts for the AquaCraft UL-1 Superior
use the order numbers in the replacement parts list that
follows. Replacement parts can be purchased from your
local hobby shop or by mail order. If you need assistance
locating a dealer to purchase parts, visit www.hobbico.com
and click on “Where to buy”. If you are missing parts, contact
Hobbico Product Support at:
Phone: 217-398-8970
Fax: 217-398-7721
E-mail:
productsupport@hobbico.com
AQUB6227 .... Nose Canopy
AQUB6999 .... Hatch
AQUB6431 .... Exhaust Headers L&R
AQUB9300 .... Vertical Fins Yellow
AQUB9301 .... Vertical Fins Orange
AQUB9302 .... Vertical Fins Red
AQUB9303 .... Vertical Fins White
AQUB8650 .... Rearview Mirrors
AQUB7869 .... Cable Liner (.150" x 10")
AQUB7106 .... Boat Stand
AQUB6302 .... Decals
AQUB8729 .... Rudder Tiller Arm
AQUB7873 .... Flex Drive .150" Cable
AQUB9539 .... Hydro Turn Fin 2mm CNC Black
AQUB8730 .... Rudder Mounting Bracket
AQUB8731 .... Rudder Blade
AQUB6950 .... Strut Assembly
AQUB8780 .... Steering Rod Assembly
AQUB7895 .... Motor Mount
AQUB7896 .... Motor Screws
AQUB8781 .... Steering Servo Mount
AQUB9540 .... Water Cooling Jacket 36mm Dia.
AQUB9760 .... 40 x 57/3 Lifter prop
AQUG7001 .... 36-56-2030 6-Pole Marine Motor
AQUM7011 .... 60-Amp WC/WP LiPo ESC
TACJ2400 ...... Tactic TTX240 2.4 Transmitter
TACL2400 ...... TR-324 Tactic 2.4 Receiver
™
Precision Prop Balancer
Precision Prop Balancer
Precision Prop Balancer
Precision Prop Balancer
To maximize performance — and minimize damage to
on-board electronics and parts —balance your props with
the GrimRacer Precision Prop Balancer. It’s easy to use.
Three thumb screws provide perfect level adjustment, and
a precise bubble level is built into the one-piece extruded
aluminum base. The balancer includes balancing shafts for
1/8" (3.2 mm), 3/16" (4.8 mm) and 1/4" (6.4 mm) bore prop
hubs. Propeller not included.
AQUB9575
GrimRacer
™
Pro Radio Box Tape
Like champion racer Michael “Grimracer”
Zaborowski, use this 3/4" wide, clear
electrical 3M tape to seal your boat’s
radio box water-tight.
AQUB9514
