INSTALLATION INSTRUCTIONS
Aquadart Inline Slider
Step.5.1A
Insert the side panel onto the wall profile.
Step.5 Fit the side panel
Note :before you go ahead,you can choose which seal to use,one is for a more frameless look(A). Another one
is used when using body jets and strong water pressure(B)
A
Infill
Side
panel
B
To fit seal A
Step.5.2A
Assemble the bracket loosely then insert the
seal between the two glass panels.Push the fixed
panel to make sure seal A sealed the glass
fully, then tighten with screw.Ensure the gasket
has been placed between the glass and brackets.
Side
panel
Infill
Side
panel
Infill
Seal
Seal
Seal
Soft
Hard
Step.5.1A
Screw
Bracket front
Gasket
Round washer
Gasket
Bracket plate
Step.5.2A
Step.5.2A
Step.5.2A
