background image

2

YEAR

Submersible mini heater

Aqua-

nano

heater

User manual

2

YEAR

2

YEAR

Safety

1.  The Aqua-nano heater has 

been designed to operate 

accurately if the ambient 

temperature outside the tank is 

20°C or above. If the ambient 

temperature is lower than 

20°C you need to increase 

the temperature setting on the 

heater to ensure the correct 

water temperature.

2.  Read user manual carefully 

before use

3.  Only suitable for indoor use.
4.  Ensure voltage shown on the 

label matches the mains supply 

voltage.

5.  Do not insert the plug in the 

socket when the heater is not in 

the water.

6.  Do not remove the heater from 

the water when the plug is in 

the socket.

7.  Before removing the heater from 

the tank remove the plug from 

socket and let the heater cool 

down for 15 minutes.

8.  The water level must be at least 

at or above the minimum water 

level mark on the heater.

9.  Always check the temperature 

of the water with a thermometer. 

The temperature setting on the 

heater may vary.

Installation

1.  Place the heater in the aquarium, 

attaching it to the glass using 

the suction cups and ensuring 

the heater is fully submerged as 

per fig 1 below and not partly 

submerged as per fig 2. The 

heater should be positioned 

near the filter or an air stone so 

that the heated water can be 

distributed evenly throughout the 

aquarium

2.  Leave the heater in the water 

for 5 minutes before plugging 

the heater into the socket. This 

allows the unit to adjust to the 

temperature of the aquarium 

before operation.

3.  When you plug the heater into 

the socket take care to ensure 

that water or splashes of water 

cannot reach the socket.

4.  Set the temperature indicator to 

the correct position by turning 

the button on top of the heater 

into the correct position. Special 

care should be taken with the 

use of electrical equipment by or 

near children.

Fig 1

Fig 2

10. In the event of damage to the cord 

or plug do not use the heater and 

discard it.

11. Always disconnect all power to 

the aquarium before placing your 

hands in the aquarium water.

12. In the event of the heater glass 

becoming cracked or leaks 

occurring, firstly remove the plug 

from the socket then remove the 

heater from the aquarium.

13. Cracking of the heater glass is not 

covered by the guarantee. It is not 

possible to repair cracked glass.

14. This appliance is not intended for 

use by persons (including children) 

with reduced physical, sensory 

or mental capabilities, or lack of 

experience and knowledge, unless 

they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible 

for their safety. Special care should 

be taken with the use of electrical 

equipment by or near children.

Reviews: