View of inflatable (bottom up) with
DinghyRacks installed in proper locations.
End view of inflatable (bottom up) with
DinghyRack installed in proper location under pontoon.
Inflatable secured to bow with line or bungees.
Secure to bow the best way for your boat.
DinghyRack
DinghyRack
Dingh
yRac
k
Dingh
yRac
k
D
ingh
y
Rac
k
DinghyRack
DinghyRack
bottom of inflatable
bow
patent pending
Installing the
DinghyRack
is easy and does
not require any holes to be drilled into your bow.
The
DinghyRack
is designed to be installed
upside down on the bow of your vessel.
When properly installed, the
DinghyRack
system prevents oar locks and transom from
damaging your bow.
DinghyRack
brackets should be placed as
shown in Figure 2 or Figure 3. One
DinghyRack
bracket is placed on the inflatable bow and the
other two are placed on the side pontoons just
inside the transom plate.
Figure 1 shows the proper position of one
DinghyRack
bracket installed on the pontoon.
Your
DinghyRack
s are now installed and your
inflatable is ready for securing to the bow with
rope or bungee cord attached to existing cleats.
Made of durable, marine grade foam your
DinghyRack
s will provide years of service
with normal care.
Thank you for purchasing our product.
Fig.1
Fig.2
Fig.3
www.dinghyrack.com
Item No. DR-3
