CLOCK
The clock, if set, will show the time of the day (24 hour clock).
To set the clock
The machine must be in the “OFF” position.
1.
Press “CLOCK” once – the first two digits on the LED screen will
flash. Using the or scroll to the required hours.
2.
Press “CLOCK” again – the second two digits on the LED screen
will flash. Using the or scroll to the required minutes.
3.
Press “CLOCK” again to set the time.
Note: It is not necessary to set the time, unless you want the machine to
show the correct time of day or should you make use of the “TIMER ON”
and “TIMER OFF” function.
TIMER
You can only switch the machine “ON” and “OFF” once in a 24 hour cycle,
i.e. the timer has only one setting, therefore the timer is not used to switch
the heat pump “ON” and “OFF” several times a day, but merely used to
stop the heat pump from starting up for a set time in a 24 hour cycle, e.g.
during the night should the heat pump be close to a bedroom window.
How to Set The Timer “ON”
(time when machine needs to start up in
a 24 hour cycle)
Whilst the machine is in the “OFF” position, i.e. showing time, press
“TIMER ON” twice. The first two digits on the LED screen will flash.
Use the or to set the required hours. Press “TIMER ON” again.
The last two digits on the LED screen will flash. Use the or to set
the required minutes. Once the minutes have been set, press “TIMER
ON” again to save the time setting.
•
3
How to Set The Timer “OFF”
(time when machine need to run in 24
hour cycle)
Whilst the machine is in the “OFF” position, i.e. showing time, press
“TIMER OFF” twice. The first two digits on the LED screen will flash.
Use the or to set the required hours. Press “TIMER OFF” again.
The last two digits on the LED screen will flash. Use the or to set
the required minutes. Once the minutes have been set, press “TIMER
OFF” again to save the time setting.
Once the “TIMER ON” and “TIMER OFF” is activated, the LED above
the “TIMER ON” and “TIMER OFF” will light up.
If the “TIMER ON” is activated, but the “TIMER OFF” is not activated
the heat pump will run continuously, as if the timers are not set.
However, if the “TIMER ON” is not activated and the “TIMER OFF”
is activated, the heat pump will run until the “TIMER OFF” time is
reached and the machine will switch off permanently.
How to deactivate “TIMER ON” and “TIMER OFF”
The heat pump must be in the “ON” or “OFF” position. Press “TIMER
ON” twice. The LED above “TIMER ON” will flash. Press “CLOCK”.
The LED above “TIMER ON” will not be illuminated. “TIMER ON” is
now deactivated.
To deactivate “TIMER OFF”, the heat pump must be in the “ON” or
“OFF” position. Press “TIMER ON” twice. The LED above “TIMER
ON” will flash. Press “CLOCK”. The LED above “TIMER ON” will not
be illuminated. “TIMER OFF” is now deactivated.
•
•
4
