3
Unpacking
Carton Contents
• Top and bottom posts
• S-type nut
• M6x50 screw
• Hose stand
• FIBERJACKET
®
lead-in hose
• Registration card
1.
Carefully remove the steel garden hose
stand + hose and check to see that all
of the above items are supplied.
2.
Inspect the product carefully to make
sure no breakage or damage occurred
during shipping. If you find damaged or
missing parts, DO NOT return the unit
to the store. Please call the
Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-
866-766-9563).
NOTE:
Do not discard the shipping
carton and packaging material until
you are ready to use the steel garden
hose stand. The packaging is made of
recyclable materials. Properly dispose
of these materials in accordance with
local regulations.
IMPORTANT!
The equipment and packaging
material are not toys. Do not let children
play with plastic bags, foils or small parts.
These items can be swallowed and pose a
suffocation risk!
Assembly
m
WARNING!
To avoid serious
personal injury, read and understand all
safety instructions provided.
1.
To assemble the hose stand post,
take the top and bottom posts and fit
together by sliding the top post over
the connecting post. Depress the push
button on the connecting post enough
to slide into the top post (Fig. 1).
2.
Slide the top post over the connecting
post until the push button locks into
place in its respective hole on the top
post (Fig. 2).
3.
Insert the hose stand into the
corresponding holes on the assembled
hose stand post (Fig. 3 and Fig. 4).
Fig. 1
Top post
Bottom post
Connecting
post
Push button
Fig. 2
Top
post
Bottom
post
Push
buttons
Connecting
post
Fig. 3
Assembled
hose stand
post
Hose stand
