Smartlog
- 12 -
INDOOR:
To remove the upper part of the device and gain access to the inside, unscrew the lid.
Battery (The battery model may vary depending on the generation of the device. Only use batteries supplied by Aqualabo.)
Modem (The modem model may vary depending on the generation of the device.)
You can access the SIM card by removing the battery. Only standard format (2FF) SIM cards may be installed in the Smartlog.
To insert the SIM card, slide its bracket in the direction of the arrow and then lift it. Once the SIM card has been inserted proceed in reverse order
ensuring that it is correctly in position in its housing and locked.
IMPORTANT
When installing the SIM card, proceed with caution and make sure not to introduce foreign material into the device.
Every time you disconnect the battery, the Smartlog loses the current time (unless it is connected to a computer);
you will have to reset the time via its configuration software.
There is a desiccant sachet in the lower part of the housing : check the desiccant sachet which must still be in
the form of granules, a pasty consistency would indicate abnormal humidity.
Screw the lid back on, until the stop, to close the Smartlog.
A
B
A
B
C
D
E
C
D
E
Summary of Contents for SMARTLOG
Page 1: ...SMARTLOG User manual Version 1 0 ...
Page 2: ...Smartlog 2 ...
