Smartlog
- 17 -
5.5 PRE-CABLE SENSORS AND DIGITAL PROBES
Pre-wired sensors are already equipped with a connector enabling direct connection to the I/O connector of the Smartlog or via cable Y. They are
fully compatible with your Smartlog and Aquamonitor. For example the Ponsel overflow sensor.
Code
Description
MCAP/SURVERSESMLG OVERFLOW DETECTOR FOR SMARTLOG INTERNAL BATTERY INCLUDED
The Ponsel brand's Digisens digital sensors are pre-cabled with a connector enabling direct connection to the I/O connector of the Smartlog or via
cable Y. They are fully compatible with your Smartlog and Aquamonitor.
To use a digital probe on your Smartlog it absolutely must be equipped with a communication card RS485/Modbus.
A visual inspection of the inside of the Smartlog also lets you know if your Smartlog is equipped with an RS485 card. To do this, remove the housing
cover if your Smartlog contains two cards side by side, perpendicular to the motherboard of the Smartlog, the latter is fitted with a RS485 card, if there
is only one card your Smartlog is not equipped to handle digital sensors.
Code
Description
PF-ACC-C-00385
FISCHER/SMARTLOG adapter cable
PF-ACC-C-00397
SMARTLOG/FISCHER adapter cable
PF-CAP-C-00306
Digital sensor NTU SMARTLOG PLUG BULGIN 7M
PF-CAP-C-00307
Digital sensor PHET SMARTLOG PLUG BULGIN 7M WITHOUT CARTRIDGE
PF-CAP-C-00155
Digital sensor PHEHT cartridge
PF-CAP-C-00308
Digital sensor C4E SMARTLOG PLUG BULGIN 7M
PF-CAP-C-00309
Digital sensor OPTOD SMARTLOG PLUG BULGIN 7M
PF-CAP-C-00310
Digital sensor OPTOD TITANE SMARTLOG PLUG BULGIN 7M
PF-CAP-C-00311
Digital sensor CTZN SMARTLOG BULGIN 7M (E) - PVC BRANCH CONNECTION IMMERSION version
PF-CAP-C-00312
Digital sensor REDOX ANNULAIRE SMARTLOG PLUG BULGIN 7M WITHOUT CARTRIDGE
PF-CAP-C-00263
Digital sensor REDOX ANNULAIRE cartridge
PF-CAP-C-00313
Digital sensor MES5 SMARTLOG PLUG BULGIN 7M
PF-CAP-C-00314
Digital sensor VB5 SMARTLOG PLUG BULGIN 7M
Summary of Contents for SMARTLOG
Page 1: ...SMARTLOG User manual Version 1 0 ...
Page 2: ...Smartlog 2 ...