Smartlog
- 41 -
The next screen has three tabs for configuring the digital sensor and alerts:
“Settings” tab:
Sensor name entry field*
Sensor serial number
Sensor ModBus address
Adjustment of measurement ranges
Units matching the selected range
Setting the sensor heating time
Setting the storage period
(must be between 2 min and 60 min)
* 13 characters maximum
“Alerts” tab:
To enable alarms on the pressure value of each
sensor setting, select the setting to be configured
and then choose one or two ways to over-step the
set point causing an alert to be sent. Each alert is
entirely independent.
Limit over-stepping settings may include:
-
None: Non-configured alert
-
If greater than: Alert sent if the value becomes
greater than the threshold
-
If less than: Alert sent if the value becomes lower
than the threshold
-
If greater than or lower than: Alert sent if the
value becomes greater than or lower than the
threshold
Setting the ways to over-step the limit
Setting of threshold values
5
6
7
8
9
10
12
13
11
11
5
6
7
8
9
10
12
12
13
13
Summary of Contents for SMARTLOG
Page 1: ...SMARTLOG User manual Version 1 0 ...
Page 2: ...Smartlog 2 ...
