Aqualisa CENTRAL Series, Installation And User Manual

10

SMALL PILLAR TAP INSTALLATION

In addition to the guide below it is essential that the important 
information section is read and understood and that you 
have all the necessary components before commencing 
installation. Failure to install the product in accordance with 
these instructions may adversely affect the guarantee terms 
and conditions. Do not undertake any part of this installation 
unless you are competent to do so. Prior to starting, ensure 
that you are familiar with the necessary plumbing regulations 
required to install the product correctly and safely.

1   

Place the fixing bolts (2) into the tap body and secure using a 
screwdriver in the machined slot.

2   

Offer the cover plate (3) to the bottom of the tap body.

3   

Screw the flexible hoses (5) into the tap body (see Fig.1 page 11), feed 
through the hole in the mounting surface and offer the mixer tap into 
position.

4   

Feed the fixing washer (6) and fixing plate (7) onto the fixing bolts and 
secure to the underside of the mounting surface using a suitable tool. 
Ensure correct alignment of the mixer tap over the basin.

5   

Connect the flexible hoses to the supply inlets ensuring washers are 
fitted and tighten firmly.