15
6. Refit the headworks DO NOT OVERTIGHTEN.
7. Re-fit the locking nut, (o-ring), cover ring and tap knob. Tighten the grub
screw and fit the cap.
GENERAL CLEANING
Whilst modern plating techniques are used in the manufacture of these
fittings, the plating will wear if not cleaned properly. The safest way to clean
your product is to wipe with a soft damp cloth. Stains can be removed using
washing up liquid.
DO NOT USE: Scouring pads, abrasive cloths or cleaners and cleaning agents
that contain acids or bleach.
Limescale
Rub the nozzles of the shower head to break down scale build up. Should
chemical descaling of the head become necessary, remove the shower head
fully and immerse in a mild proprietary descaler.
IT IS IMPERATIVE THAT DESCALING IS CARRIED OUT STRICTLY
IN ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS.
SUBSTANCES THAT ARE NOT SUITABLE FOR PLASTICS AND
ELECTROPLATED SURFACES MUST NOT BE USED.
Summary of Contents for CENTRAL Series
