10
Place the end caps into the upper and lower rail brackets and push
firmly into position.
7
Ensuring the hose washer is in the correct position; attach the
non-conical end of the hose to the wall outlet. Run the shower for a
few seconds to clear any debris that may be present.
Pass the conical end of the shower hose through the hose restraint.
Ensuring the hose washer is in the correct position; attach the
conical end of the hose to the shower head, then place the hose in
the handset holder.
Run the shower and check for leaks.
8
9
10
11
Slide the rail assembly up through the upper rail bracket.
5
Align the small hole in the rail with the
lower rail bracket. Secure the lower
rail bracket to the wall, using the long
wall screw.
6