5
Operation manual ENG
In purchasing this unit, you have selected a top quality product. It has been specifically designed for aquarium
use and has been tested by experts. High quality components and newest technology as well as modern
design guarantee that you will enjoy your aquarium lighting for many years.
1.
Technical Data
LED aquarium light for freshwater aquaria
The
aquarius
plant
light is made of high quality aluminium in a slim design which offers even illumination of
your aquarium. The compilation of the six individual light colours can be specifically adjusted to the needs of
freshwater aquaria. The light has preparation for connecting a 6-channel controller which makes individual
adjustment of light colour, light intensity and light settings possible.
Equipment:
-
LED light with 6 colours
-
Prepared for connecting a 6-channel controller
-
Anodized housing made of aluminum for cooling passively (no fans)
-
For safety 24 V with external transformer (100 - 240 V / 50 - 60 Hz)
-
Adjustable holder for fixing onto the aquarium
Optional:
-
aquafit II
steel wire suspension
aquarius
Total
consumption
Total
LED
lumen
Dimension (l x w
x h)
For aquaria
(length)
Light
colours
Colour
temperature
60
max. 65 W
4,550 lm
580 x 210 x 25
mm
600 - 900 mm
white
warm white
blue
red
ruby red
green
6,000 – 6,500 K
2,800 – 3,200 K
460 - 470 nm
640 - 660 nm
620 - 630 nm
520 - 530 nm
90
max. 95 W
6,825 lm
840 x 210 x 25
mm
850 – 1,100
mm
120
max. 128 W
9,100 lm
1,100 x 210 x 25
mm
1,150 – 1,350
mm
2.
Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of complaints,
please contact your dealer directly.
Included in shipment:
•
aquarius plant incl. power pack 24 V DC output
•
aquaria fixing (please refer to pict. 2)
•
4 screws for fixing the optional wire suspension aquafit 2
3.
Safety advices
•
The lighting system cannot be used as aquarium cover. It has to be mounted only above the aquarium.
When using the wire suspension aquafit 2 (not included in shipment), the minimum distance between
lighting and aquarium should be at least 30 cm.
•
The housing may become hot during operation.
Be cautious when touching it!
For cleaning, disconnect
the light from the mains and let it cool down. Afterwards, take the light down.
•
When cleaning, take care that no humidity passes the ventilation slits and enters the interior of the lighting
system!
•
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount the system
in enclosures or behind panels. Missing aeration may result in overheating and damage electrical
components.
When used under a cover, one or more permanently running fans with sufficient
power are required. Otherwise, overheating or corrosion due to condensation may occur.
•
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of defects and
a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the manufacturer.
•
When working on the light, always pull all power plugs.
