2
reactor 100
Operation Manual ENG
The CO
2
-reactor 100 has been developed for CO
2
fertilization of freshwater and saltwater aquaria.
The unit has been especially designed for internal use, inside the aquarium. Please read and follow
the instructions carefully. The CO
2
-reactor will be very reliable and trouble-free.
3. Maintenance
The reactor 100 is maintenance-free. If, after a longer period of operation, the ceramic diaphragm
is clogged by dirt or algae, you can clean it by placing it for a certain time into 6%
hydrogenperoxide. (Pay attention to the safety advice on the bottle.)
4. Warranty
Should any defect in materials or workmanship be found within 24 months of the date of purchase
AB Aqua Medic undertakes to repair, or at our option replace, the defective part free of charge –
always provided the product has been installed correctly, is used for the purpose that was intended
by us, is used in accordance with the operating instructions and is returned to us carriage paid.
Proof of Purchase is required by presentation of the original invoice or receipt indicating the
dealer’s name, the model number and date of purchase. This warranty may not apply if any model
or production number has been altered, deleted or removed, unauthorised persons or organisations
have executed repairs, modifications or alterations, or damage is caused by accident, misuse or
neglect. Please note that the product is not defective under the terms of this Warranty where the
product, or any of its component parts, was not originally designed and / or manufactured for the
market in which it is used. These statements do not affect your statutory rights as a customer.
AB Aqua Medic GmbH
-
Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 07/2016
1. Parts of the reactor
1.
Connection for CO
2
-hose
2.
Rubber sucker with holder
3.
Glass body with ceramic diaphragm
2. Set up
-
Connect the hose connection (1) of the reactor
to the CO
2
-hose (6 mm ø).
-
Fasten the unit with the rubber sucker as deep
as possible below the water surface at the
aquarium glass.
-
Check the CO
2
-dosing by a bubble counter (e.
g. Aqua Medic bubble counter) and place a
non-return valve between the CO
2
-bottle and
reactor 100.
