Chapter 3
17
Operation
Clear Log
The Clear Log Mode allows the measurement log to be emptied. This clears the
memory for the next set of readings to be stored.
1. To erase the measurement log, press the [MODE] key to access the Mode menu.
2. Press either the
[UP]
and [DOWN] key to reach the “Clear Log” prompt.
Pressing the [ENTER] key activates the Clear Log Mode and allows the
measurement log to be erased.
3. The “Clear Log?” prompt will be displayed. Use the
[UP]
and [DOWN] keys
to toggle between the answers YES and NO. To clear the log, toggle to YES
and press [ENTER]. To leave the log untouched, toggle to NO and press [EN-
TER].
After the [ENTER] key is pressed, the Water Analyzer will resume displaying the
measured parameters.
RS-232 Option
The Water Analyzer can be optionally equipped with an RS-232 interface and time
clock, which links the Water Analyzer with a personal computer. With this link,
parameters that have been read and stored can be downloaded to a file in the
computer.
Timed Readings—Auto Logging
1. Clear the log (see “Clear Log” in this chapter).
2. Press the [MODE] key. Press either the
[UP]
and [DOWN] key until the
“Timed Readings” prompt is displayed.
3. Press the [ENTER] key. The screen will display “Store 10 minutes”. This
means that a set of readings will be taken and stored every 10 minutes.
Shorter or longer intervals can be selected by using the arrow keys and
pressing [STORE] to initiate the operation of the timed readings.
The first reading will be taken immediately after the [STORE] key has been
pressed. Subsequent readings will be taken at the interval selected. As each reading
is taken, a location number will appear momentarily in the middle of the display
top line.
To defer timed readings or terminate the mode, press the [MODE] key twice or
turn the instrument off.
The clock values will be stored but not displayed on the meter. Stored clock values
Summary of Contents for Aqua-Check
