countdown. The output will turn on until the end of the
countdown. You can pause the countdown anytime
during the period by pressing the MANUAL button. To re-
start press the MANUAL button again. To review the time
during the countdown period, press and hold the CLOCK
button, release the button to return to the countdown
display. To return to the timer mode, press the CLOCK
and PROG button simultaneously.
SWITCH OVER SUMMERTIME/WINTERTIME, TIME ZONE
CHANGE
To change from winter time to summer time press the
HOURS and MIN. buttons simultaneously. The clock will
be set forward one hour and an “S” will appear on the
display. Repeat the same procedure in order to return to
winter time.
RESET BUTTON
To reset the unit, both the time and programmed ON/Off
settings press the RESET button.
IMPORTANT SAFETY PRECAUTIONS
Do not use on an extension lead.
Do not plug this timer into another timer switch
Do not plug any device performing mechanical
movement directly into the timer. Fan heaters and
heaters with exposed elements should not be left
unattended and it is recommended that these types of
appliances are not connected timers.
Do not insert needles or any other metal objects into
mains outlet. Avoid moisture, extreme temperatures,
shock and vibration. Use indoors only. Recommended
ambient temperature – 10 degree C to 40 degree C.
Do not open the timer. Repairs must be performed by
authorized service personnel only.
To clean casing and display use a soft cloth. Do not use
chemical or scouring agents. Do not submerge in
water. Keep device out of the reach of children.
SPECIFICATION
Input – AC 125C 60Hz
Output – 15A Resistive load, 15A Tungsten
Operating temperature – 10 degree C to 40 degree C
Min setting time: 1 minute
Back Up Battery: Rechargeable Battery
Horse Power: 1 HP
Summary of Contents for AMK-T
Page 3: ......
