- EN -
11
Information about these operating instructions
You made a good choice with the purchase of this product
Pond Pump PP-2500/PP-5000/PP-9000/PP-12500
.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Warnings used in these instructions
The warning information is categorised by signal words, which indicate the extent of the hazard.
W A R N I N G
Indicates a possibly dangerous situation, which could lead to death or severe injuries, if not avoided.
T I P
Useful tip.
Cross-references used in these instructions
A reference to a figure, e.g. figure A.
→
Reference to another section.
Safety information
Correct electrical installation
•
Electrical installations must meet the national regulations and may only be carried out by a qualified electrician.
•
A person is regarded as a qualified electrician if, due to his/her vocational education, knowledge and experience, he
or she is capable of and authorised to judge and carry out the work commissioned to him/her. This also includes the
recognition of possible hazards and the adherence to the pertinent regional and national standards, rules and regu-
lations.
•
For your own safety, please consult a qualified electrician.
•
Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash
-
proof).
•
Protect the plug connection from moisture.
•
Only connect the unit to a correctly fitted socket.
Safe operation
•
The impeller unit in the pump contains a magnet with a strong magnetic field that may affect the operation of pace-
makers or implantable cardioverter defibrillators (ICDs). Always keep magnets at least 0.2
m away from implanted
devices.
•
Never carry or pull the unit by the electrical cable.
•
Route cables such that they are protected from damage and do not present a tripping hazard.
•
Never carry out technical changes to the unit.
•
Only carry out work on the unit that is described in this manual. If problems cannot be overcome, please contact an
authorised customer service point or, if in doubt, the manufacturer.
•
Only use original spare parts and accessories for the unit.
