background image

LIMITED WARRANTY 

 

All pumps and electrical products are warranted to the user against defective material and workmanship, 
under normal working conditions.  This warranty period begins on the date of purchase by the original 
purchaser.   
 
All aquanique™ electrical products are warranted to the user against defective material and workmanship, 
under normal working conditions for 1 year from the date of purchase.  All aquanique™ liners are 
warranted to the user against defective workmanship, under normal working conditions for 20 years from 
the date of purchase.  All other aquanique™ product is warranted to the user against defective material 
and workmanship, under normal working conditions for 90 days.   

 

Application 

Warranty covers only properly installed and maintained units.  Pump warranty is limited to applications 
pumping fresh water in a pond or fountain only.  Other liquid applications or extreme temperature uses 
must be approved in writing by the manufacturer.  Receipt and product date code are required for warranty 
claims. 
 

Warranty Claim 

Warranty claims must be made by calling customer service (at 1-888-314-2588).

  If the item is 

determined to be defective, you will be given authorization to return the defective part(s), freight pre-paid, 
along with proof of purchase. 

 

 

Disposition 

The manufacturer will make a good faith effort for prompt disposition regarding all warranty claims.  
Returned product will be inspected to determine cause of failure before warranty is applied.  Warranty does 
not cover any costs associated with the shipping, handling, installation or removal of products or parts 
subject to this warranty.  For products damaged in transit, a claim should be filed with the carrier. 

 

Disclaimer 

Any oral statements made about the product by the seller, the manufacturer, the representatives, or any 
other parties do not constitute warranties, should not be relied upon by the user, and are not part of the 
contract for sale.  The seller’s and manufacturer’s only obligation, and buyer’s only remedy shall be for the 
manufacturer to either replace and/or repair at the manufacturer’s sole discretion, the product as described 
above.  Neither seller nor the manufacturer shall be liable for injury, loss or damages for lost profits, lost 
sales, injury to person or property, or any other incidental or consequential loss arising from any cause 
whatsoever, no matter whether based upon warranty, contract, negligence or other misuse, and the buyer 
and user agree that no other remedy shall be available to them. Before using, the buyer and user shall 
determine the suitability of the product for the intended use, and assume all risk and liability whatsoever in 
connection therewith.  The warranty and remedy described in this limited warranty is an exclusive warranty 
and remedy in lieu of any other warranty or remedy expressed or implied.  All other warranties and 
remedies are hereby expressly excluded, including but not limited to any implied warranty of 
merchantability of fitness for any particular purpose.  This warranty gives the buyer and user specific legal 
rights, and buyer and user may also have other rights which vary from state to state.  Some states do not 
allow exclusions or limitations of incidental or consequential damages, so the above limitations or 
exclusions may not apply to you. 
 

REMINDER 

CALL 1-888-314-2588 

BEFORE RETURNING TO STORE.

 

                                                                                                 

 

Summary of Contents for QDAR









Reviews: