background image

 

 

Waterfall Cascade with White LED 
Lights 

 
 

ITEM # QDLS12B

 

 

PACKAGE CONTENTS 

 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  WARNINGS AND CAUTIONS  

WARNING 

 

To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle . 

 

Do not exceed the input voltage shown on the transformer. 

 

Do not submerge the transformer. 

 

To reduce the risk of fire or injury, keep lamp away from materials that may burn. 

 

Always disconnect light from the power source before beginning any maintenance or work on the light. 

 

Inspect cord for damage before installation and/or maintenance. Replace the entire light/transformer 
assembly if damage is found. 

CAUTION 

 

Use a proper power source as indicated on the transformer label.   

 

Keep the cord away from high temperatures or other heat sources. 

 

Do not lift the light or the transformer by its power cord. 

 

This light assembly is not intended for use in swimming pools or hot tubs.  

 
 
 
 
 

Part 

Description 

Quantity 

Spillway 

Transformer 

Hose clamp 

 

 

REMINDER 

CALL 1-888-314-2588

 

BEFORE RETURNING TO STORE. 

Questions, problems, missing parts? 

Before returning 

to your retailer, call our customer service department at  
1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.  Or 
visit our website www.aquanique.com. 

 

Summary of Contents for QDLS12B








Reviews: