Mechanical Filter Box
Up to 500 gallons
ITEM #QFUPFB
PACKAGE CONTENTS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 15 minutes
•
No tools required for assembly.
PRODUCT DESCRIPTION
The QFUPFB is a general purpose, mechanical / biological filter system. It is designed to filter the water
and promote healthy bacteria that will provide a balanced environment in your pond. This filter is designed
to work with a water pump that can circulate a minimum of 200 gallons per hour. As a pre-filter, the
QFUPFB reduces pond debris and particulate before they enter the pump and other pond accessories.
This pre-filtration reduces the clogging of your pump and accessories and minimizes the need for cleaning.
ASSEMBLY INSTRUCTIONS
1. Place your pump inside the filter box, close to the center. Make
sure that the outlet points up. Route the cord through the hole
in the top corner of the filter box bottom. Fig. 1
NOTE: Pump is NOT INCLUDED. This filter is compatible
with pump models QFP320, QFP525, QPP225
QPP350 and QPP575.
Fig. 1
Part
Description
Quantity
A
Filter box top
1
B
Filter box bottom
1
C
Coarse filter pad
1
D
Fine filter pad
1
E
Bio media balls
10
A
B
D
E
C
Pump
REMINDER
CALL 1-888-314-2588
BEFORE RETURNING TO STORE.
Questions, problems, missing parts?
Before returning
to your retailer, call our customer service department at
1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday. Or
visit our website www.aquanique.com.
