④
Connect the insulated black high temperature steam pipe, which is on the steam outlet, to the steam
jet’s connector on the spa’s back panel
. (Figure 10)
⑤
The water hose for the rainfall shower goes
through the hole in the shower roof /ceiling and then connect
it
to the elbow fixture of the shower head with a clamp as is shown in the below figures.
(Figure 11)
Black insulated high temperature
steam pipe
Front and side view of Steam outlet
Figure 10
Figure 11
Rainfall shower hose
When bending the insulated
steam hose
, please Use Extreme Care not to crimp the hose as
you feed it through the appropriate hole in the tub section.
The rubber washer (gasket) that is secured by a wire tie is inserted into the end of Steam hose
The all silver hose is the water supply feed hose to the Steam generator. It is attached here
Photo is not of Caribbean. But connections are the same. The placement of
components may be different
.
