Carefully lift (two
p e o p l e
a r e
recomended)
the
back panel onto the
bathtub. Fasten them
together using 1/4x1
inch bolts with the
gaskets in place.
Step 4
Step 5
3. Lift the left
back-panel onto the
bathtubs back edge
(two people are
recommended) as
shown in the
drawings and photos,
align the mounting
holes of the back-
panel with the holes
drilled into the
bathtub. Connect the
sides of both panels
with ¼ x 5/8 inch
bolts and connect the
bottom of the panel to
the tub with ¼ x 1
inch bolts hand tight.
4. Assemble the right
side as you did the
left.
There are four gaskets wire tied as shown in the
photo to the far left. Remove them by clipping
the wire tie. They are inserted into the top and
bottom of both wide vertical aluminum channels
as shown by the arrows in the photos to the near
left.
Step 2
Step 3
Summary of Contents for Mazatlan
Page 1: ...Mazatlan INSTALLATION MANUAL...
Page 4: ...Page 3...
