Operation instruction of S198E system
then momently press once again to enter duration setting mode. As the icon
flashes, rotate the shuttle switch to adjust the time or press on the remote
control to increase the time or to decrease the time. Timing range: 5 ~ 50min.
⑤
. Settings of temperature and time would automatically take effect in 3 seconds,
the system would exit the temperature and time setting mode.
⑥
Drainage: 5 minutes after the shutdown of system, the steam tank would drain
water for 3 minutes.
2. Spray(
Optional
)
Move the cursor to and press the shuttle switch. The first press would
turn on upper spray; the second press--switch to middle spray; the third press–
switch
to lower spray; the fourth press would start the automatic cycle of upper,
middle and lower spray; the fifth press--switch to overhead spray. There is a
1-second delay before the overhead
spray starts; the sixth press would turn off the
spray. The spray type would change every
5 seconds in the cyclical mode.
In the case that the remote control is used to control the spray, momently
press
on the remote control. The first press would turn on upper spray; the
second press--switch
to middle spray; the third press--switch to lower spray; the
fourth press would start the automatic cycle of upper, middle and lower spray; the
fifth press would turn off the spray. When the overhead spray is off, press on
the remote control to open overhead spray (other sprays are off). Then press the
button again to turn off overhead spray
.
3 Exhaust fan function
Move the cursor to and press the shuttle switch or momently press
16
