17
ONE | USE AND INSTALLATION GUIDE
6/7
7/7
Add the push-in reducer
to connect the 1/4
″
OD
and 3/8
″
OD PE pipe
with retaining rings
before and after.
Insert the 1/4
″
OD PE
pipe from the pressure
reducer into the smallest
end of the push-in
reducer. Push in a small
retaining ring between
the grey ring and the
push-in reducer.
Cut the length of the
3/8
″
OD PE pipe to fit
your installation.
Insert the 3/8
″
mm OD
PE pipe to “inlet water”
on ONE. Push in a large
retaining ring between
the grey ring and the
machine.
7
8
8
Insert the 3/8
″
OD PE pipe
on the largest end of the
push-in reducer and push
in a large retaining ring
between the grey ring and
the push-in reducer.
5
5
Inlet
water
INLET INSTALLATION
4
3
