24
ONE | USE AND INSTALLATION GUIDE
COMPLETE THE
INSTALLATION
Plug in the power adaptor to your
power supply.
The lights on the front panel will blink
and you hear a “ding” sound.
Once the lights on the front panel stop
blinking, open your faucet.
Now you can hear the water flowing
into the machine.
Remember to flush before consuming
the water!
After installation of your ONE or after
replacing the cartridges the system
must be flushed before consuming
the water. This is done by leaving the
faucet open for 30 minutes. Note that
the first water coming out will be black.
Check that none of your connections
leak and the that you have no breaks
on the PE pipe.
You will be left with one spare part
which is one large retaining ring.
Discard or keep this for later use if you
are to re-locate your ONE.
Enjoy.