With an adjustable wrench, turn off and disconnect cold water
supply. Attach Dual Port Adapter to shutoff valve and re-attach
cold water line to the Dual Port Adapter.
Connect 3/8" tubing to the
bottom port of the Dual Port
Adapter. Run the opposite
end of the tubing to the inlet
side of the System Head
(marked "IN"), cut to length,
and push tubing into the inlet
until it stops.
Using the second piece of
3/8" tubing, connect one end
to the top port of the Dual
Port Adapter and run it to the
right side of the System Head
(marked "OUT") cut to length,
and push tubing into the
outlet until it stops.
NOTE:
Use 3/8" quick connect elbows if necessary.
Inlet
Outlet
6
7
INSTALLATION STEPS
5
1
2
3
