WW 16
PLUG IN AND TWEAK THE WATERFALLS
• As soon as the pond is fi lled and all of the black waterfall
foam is dry, you may plug the pump in and test the
waterfall.
WARNING
Any electrical should be plugged into a GFCI rated
receptacle.
• You can tweak the waterfall fl ow by placing smaller stones
and gravel on the waterfall cascades. This will change the
appearance and sound of the water. Have fun playing with
the fl ow of water coming over the falls until you achieve the
desired effect.
STEP 17
TRIM THE LINER
• With everything running, go around the perimeter of the
pond with a pair of scissors and trim off any excess liner,
always leaving several inches above the water level as a
precaution. The remaining liner edges can be covered with
gravel. sod or mulch.
WARNING
Do not trim the liner until the waterfall is
running and the pond is fi lled to the desired level.
Prematurely trimming the liner may cause leaks!
STEP 18
MULCH AND LANDSCAPE
• The entire area surround-
ing the basin can now be
mulched and any surround-
ing plants added.
26
www.aquascapeinc.com
