11
aquascapeinc.com |
☎
CAN (866) 766-3426 |
☎
US (866) 877-6637
5. The quartz sleeve can now be accessed for cleaning
or replacement.
6. If replacing or removing the quartz sleeve, remove the
threaded plastic collar that locks the quartz sleeve over
the water-tight seal and remove the quartz sleeve.
NOTE: Do not touch UV bulb with bare hands,
as the oil from skin will reduce the bulb’s
performance and lifespan.
5. Carefully remove the Control Board with attached UV bulb
from the lid by pulling STRAIGHT UP, making sure not to
break the UV bulb.
Changing the UV Bulb
1. Always unplug both the pump and the
UltraKlean Pond
Filter before
releasing the lid
clips to service the
fi lter.
2. Remove the plastic
cover surrounding
control panel. The
panel should be
removed without tools.
3. Inspect area around the base of the control panel before
removing and drain any water that has collected around
this area from rainfall.
4. Rotate the electronic control board counter-clockwise
to disengage the control board from the lid.