AquaSure FORTITUDE PRO Series, Manual

6

AQUASURE 

FORTITUDE PRO SERIES

IMPORTANT!

 Locate and test the main water supply valve to the housing before installing 

the system. If the main water supply valve fails to shut off the water completely during the 
test, we recommend contacting your local plumber to fix the valve before begin installing the 
system. 

WARNING! 

If this system is install in a metal (Conductive) plumbing system, i.c. copper or 

galvanized metal, the plastic components of the system will interrupt the continuity of the 
plumbing system. As a result, any arrant electricity from improperly grounded appliances 
downstream or potential galvanic activity in the plumbing system can no longer ground 
through contiguous metal plumbing. Some homes may have been built in accordance with 
building codes, which actually encouraged the grounding of electrical appliances through 
plumbing. A grounded “jumper wire” bridging the equipment and reestablishing the 
contiguous conductive nature of the plumbing system must be installed prior to your system 
use. 

Note: 

Although not required, we highly recommend installing a bypass before the system 

install to help ensure there’s no downtime for water usage during repairs or replacement of 
systems. See 

Diagram A

 for bypass installation examples.

Note: 

Depending on the water flow direction, the media reset backwash port may be located 

in the front or the rear of the system. See 

Diagram B 

for port direction examples.

INSTALLING THE SYSTEM

Diagram A

Diagram B

Left to right water flow

Backwash port position 
top view

SHUTOFF  

VALVE 1

SHUTOFF  

VALVE 3

SHUTOFF  

VALVE 2

Diagram B

Backwash port position 
top view

BYPASS

Diagram A

Right to left water flow

SHUTOFF  

VALVE 3

SHUTOFF  

VALVE 1

SHUTOFF  

VALVE 2

BYPASS

Front

Front