18
SPA MAINTENANCE
SURFACE CARE
Do not use solvents or abrasive cleaners to clean the spa. Typically, a mild detergent and water
will resolve cleaning issues.
COVER CARE
Please keep your cover free from dirt at all times. Use a cover cleaner or a warm, mild soapy
water to clean the surface. Do not use any silicone-based products, as it will dry and may
eventually crack the vinyl.
NOTE:
Do not stand on the cover at any time. Remove the cover when
adding chemicals to your spa. This will extend the life of your cover. The gasses from burned off
chemicals will be trapped under the cover, if not removed. These gasses may erode the protective
lining of the foam inserts. This will not be covered under warranty.
CABINET CARE
Little maintenance is required to keep your spa cabinet looking good.
Spa cabinet product should be cleaned as needed to remove dirt and debris.
• NO abrasive or harsh chemicals should be used on the spa's cabinet.
• NO solvents or cleaners containing aromatic solvents should be used on the spas cabinet.
• Hot soapy water is the best choice for cleaning the spa's cabinet.
SPA LED REPLACEMENT
• Turn OFF the power to the spa.
• Remove the equipment compartment access door.
• Locate the rear of the spa light.
• To remove the LED board, turn outside housing counter clockwise ¼ turn, and pull out and
remove LED board from socket.
• Replace by reversing the above steps.
Summary of Contents for Aryana
Page 1: ...OWNER S MANUAL 110V 230V 60Hz Models 303556 21 A 9 20 ...
Page 48: ...MANUAL DEL PROPIETARIO Modelos de 110 V 230 V 303556 21 A 9 20 ...
Page 49: ...MANUAL DEL USUARIO Modelos de 110 V 230 V 60 Hz 303556 21ES A 9 20 ...
Page 73: ...MANUEL DU PROPRIÉTAIRE Modèles 110 V 230 V 60 Hz 303556 21FR A 9 20 ...
