CLOSING PROCEDURES
Technical Module
Cartridge
filter
Strainer basket(s)
15
For the technical module
Using the wet/dry sweeper, suck up the trapped water in the
technical module’s components.
Pump
Unscrew and remove the drain plug on the front of the pump
(turbine).
Vacuum the remaining water. Store the plug dry.
Pump strainer
Unscrew and remove:
- the transparent cover
- the basket
- the drain plug beneath the strainer
Vacuum the remaining water. Close the cover of the strainer
and store the baskets and plugs dry.
Filter
Remove the cover of the filtration system and the cartridge.
Clean and store the cartridge in a dry place.
Vacuum the remaining water
at the bottom of the filter
cylinder. Close the cover of the filter cylinder.
Vacuum the remaining water through the pipe connections at the
pump inlet and the filter outlet.
Tighten all pipe connections to prevent rodents from getting in
during the winter.
Close the technical module cover and place a tarpaulin over it to
protect it from water.
Strainer cover(s)
