SPECIFICATIONS:
Rough-In Plumbing
Measurements
luxEAIr SErIES
Model # AI34lUX7236 / AI29AIR7236To (Tub only)
luxEAIr 34 MOTIF
36 1/2”
Pump
Blower
5 1/2”
13 1/2”
Deck Width
2 1/2”
Total
Width 5”
GeneRal SPecIfIcatIonS:
Tub Size
73” x 36 1/2” x 25”
185 cm x 93.3 cm x 63.5 cm
Bathing Well
46” long
20” wide
23” interior depth
Maximum Water Depth 17”
Shipping Weight
250 lbs. / 113 kg
Tub Weight Filled
933 lbs. / 423 kg
Tub Only Weight
106 lbs. / 48 kg
Weight w/Equipment 175 lbs. / 79 kg
Gallons to Overflow 91 gal. / 344 L
Gallons to Operate 72 gal. / 273 L
electRIcal SPecIfIcatIonS:
Pump
1.75 HP; 12 AMP; 110V
Inline Heater
1.5 kW; 12.5 AMP; 110V
Requirement
1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower
1 HP; 10.5 AMP; 110V
Requirement
1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
oPtIonal equIPMent:
•
Chromatherapy LED Lighting
•
Comfort Pillow - Oval or Rectangle
•
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
•
Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•
Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
•
Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished
Nickel, Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
•
Hand Held Jet - Chrome or Polished Brass
•
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading fixture manufacturers.
fax-on-Demand
Document # 1292
StanDaRD equIPMent:
7 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 1 Recessed Rotary Massage Jet
air Bath System:
- 55 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- 3 Massage Settings: Constant, Wave and Pulse
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
aquatic quality features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- 1.5 kW Inline Maintenance Heater
- “Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to C
lean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
Back
Angle
21˚
January 2008
20 1/4”
73”
36 1/2”
22 1/4”
25”
68”
68 1/2”
33”
