Hand Control Up
Hand Control Down
Mode Select
AM/FM
Tunes to next station
Tunes to previous station
Switches Mode
Bluetooth
Next Track
Previous Track
Switches Mode
AUX
Switches Mode
( + )
( - )
Audio
AM/FM
Turns volume up
Turns volume down
Accesses Audio menu adjustments
Bluetooth
Turns volume up
Turns volume down
Accesses Audio menu adjustments
AUX
Turns volume up
Turns volume down
Accesses Audio menu adjustments
The AQ-MP-5BT-H re12V DC to both the red and yellow wires. When both of these wires
have power the AQ-MP-5BT-H is powered on. Ground is connected to the black wire.
Once all connections are made press the rotary knob and the stereo will turn ON.
1.9 Power On
The AQ-MP-5BT-H is a plug and play solution for 1998-2013 Harley-Davidson
®
Motorcycles.
Plug the standard Harley-Davidson
®
23-pin connector in to the back of the AQ-MP-5BT-H and
your speakers and hand controls will work the same as the standard factory install (some Harley-
Davidson
®
models may require additional steps).
Some stock Harley-Davidson
®
features e.g. CB radio will not be supported through the AQ-MP-
5BT-H.
Below is a matrix of what can be controlled on the AQ-MP-5BT-H via the stock Harley-Davidson
®
hand controls.
1.8 Handle Bar Controls
Audio switch (left hand side)
Mode switch (right hand side)
4.5 Switching between US and European FM Modes
1. When in ‘RADIO’ mode.
2. Press and hold the ‘AUDIO/MENU’ button to enter the System Menu.
3. Press the ‘AUDIO/MENU’ button to scroll through the options.
4. Scroll to ‘AREA’ then; turn the rotary knob to select your desired tuning area.
5. Once the desired tuning area has been selected you can press esc to return to FM Mode.
US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5, 88.6,88.7 MHz. EUR mode will
increase and decrease the FM frequency in steps of 0.05 MHz, e.g. 88.25, 88.30, 88.35 MHz.
4.2 Scan or Navigate FM/AM Radio Channels
1. Press FAST REWIND/FAST FORWARD to seek another station.
2. Press and hold either FAST REWIND/FAST FORWARD for manual tuning back or forward.
4.3 Saving Radio Channel to Memory
1. Tune to the station you would like to be saved as a preset.
2. Press and hold the ‘Preset’ Button.
3. The stereo will enter the add preset button menu.
4. Using the rotary knob you can choose which preset slot you would like to save the current
station to.
5. Upon successfully saving a preset, the preset number that was chosen will be shown in
the right corner.
4.4 Listening to Saved Radio Memory
1. Once the presets have been set either manually or using AS/PS press the ‘Preset’ button
to scroll through your presets.
Presets are only for the current band you are on. Each band FM1, FM2, FM3, AM1 and AM2 has six presets for a
total of 30 (18x FM & 12x AM).
4.1 Enter FM/AM Radio Mode
1. Press MODE on the unit keypad to switch to FM/AM radio mode.
Getting Started
Media Player AQ-MP-5BT-H
7
www.aquaticav.com/harley
Listening to FM/AM Radio
Media Player AQ-MP-5BT-H
www.aquaticav.com/harley
10
