Aquatic 15
Estate Air-Whirlpool Owner’s Manual & Installation Guide
OPERATION
BATHSIDE CONTROL SYSTEMS
KeyPad Functions
LED
1: On/Off Pump
1st Press: The pump starts
ON
2nd Press: The pump stops
OFF
2: ON/OFF BLOWER
1st Press: The blower starts
ON
2nd Press: The blower stops
OFF
3: BLOWER CYCLES
1st Press: Wave Cycle - Speed goes gradually from maximum to minimum.
ON
2nd Press: Pulse Cycle - Speed goes from minimum then straight back to maximum.
BLINK
3rd Press: Returns to maximum speed
OFF
4: SPEED INCREASE
1st Press: Press and hold to increase the blower speed,
release pressure at the desired speed.
When in cycles mode, increases the speed at which the cycle operates.
ON
(WHEN PRESSED)
5: SPEED DECREASE
1st Press: Press and hold to decrease the blower speed,
release pressure at the desired speed.
When in cycles mode, decreases the speed at which the cycle operates.
ON
(WHEN PRESSED)
Advanced Programming
DRYING CYCLE WITH WATER DETECTORS
The drying cycle will activate 20 minutes after the bathtub is emptied
even if the system was not used.
The blower touch LED blinks while waiting for the purge cycle.
INTEGRATED 20 MINUTE AUTOMATIC TIMER
Integrated 20 minute automatic timer on the complete system.
Count down starts with the last system turned on.
1: ON/OFF PUMP
2: ON/OFF BLOWER
3:
BLOWER CYCLES
4: SPEED INCREASE
5: SPEED DECREASE
OR
Figure 6
Summary of Contents for ESTATE AIR-WHIRLPOOL
Page 27: ......