Aquatic 3
Estate Air-Whirlpool Owner’s Manual & Installation Guide
Thank you for choosing an Aquatic bath. You have chosen one of the finest bath products in the industry! Aquatic supports
your purchase with strong commitments to quality and customer satisfaction.
Please read and follow all of the instructions contained in this Owner’s Manual before installing, operating or maintaining
your bath. In addition, you should continually refer to these instructions during the life of your air-whirlpool bath. Failure to
comply with these instructions may invalidate your warranty. If you have any questions concerning installation, operation,
maintenance or any other aspect of your Aquatic bath, please contact:
AQUATIC CUSTOMER SERVICE CENTER: (800) 945-2726
(The Troubleshooting Guide on page 23 may be helpful in answering some of your questions.)
NOTE:
The installation and service of your air-whirlpool
should be performed ONLY by a qualified electrician and plumber.
AQUATIC
Product Warranty Registration Information
IMPORTANT!
8101 E. Kaiser Blvd., Suite 200 • Anaheim, CA 92808
(800) 945--2726 • Fax (866) 544-5353
www.aquaticbath.com
IMPORTANT!
To activate Product Warranty please register with Aquatic.
Your product warranty must be registered and confirmed with Aquatic through
the Serial Number on your unit. To register, please contact Aquatic.
(800) 945--2726 • www.aquaticbath.com/register
This product
MUST BE WATER-TESTED
and inspected prior to installation
or warranty will be voided. See page 6 for instructions.
PLEASE CHECK ENTIRE UNIT FOR ANY DAMAGE.
If it appears damaged, contact your Aquatic Distributor immediately.
Aquatic warranty does not cover damage that occurs in transit.
IMPORTANT!
MODEL & SERIAL NUMBER LOCATION
The tub model and serial numbers are located above the
pump area on the backside of the bathtub. An access
panel should be placed by the installer at this location.
Summary of Contents for ESTATE AIR-WHIRLPOOL
Page 27: ......
