— 3 —
Customer Service (800) 945-2726 • www.aquaticbath.com
Installation Instructions
F
2
DRAIN
FOR USE WITH AQUATIC 2-PIECE FREESTANDING BATHTUBS
Step 4:
A.
Add two spacers (example 2x4) on
the apron ends and insert the bathtub
inside it (make sure the slip joint
male part is inside the female part).
In case the valves are installed on
the bathtub, do the water connection
fittings and test to prevent leakage.
NOTE: Make sure there is an insulating
strip between the deck and the apron.
Step 3:
A.
Place the apron in the desired position,
by aligning and inserting the alignment
pins of the installation flange in the holes
in the apron.
B.
Adjust position of the apron. Screw the
apron to the floor as indicated in the
bathtub installation guide. Drill 4 holes
using a
3
⁄
8
" drill bit in the indicated
locations (Fig. 3B) and fasten to the
ground. Apply a bead of silicone
under the deck (optional).
Holes in the apron
Aligning pins
3A
3B
Side cut view
4A
Spacer
