106
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
August 2008
Rough-In Plumbing
Measurements
hOTSOAk 62
hOTSOAk SERIES
Model
# AI3AIR7236HS
GeneRal SPecIfIcatIonS:
Tub Size
71 1/4” x 36” x 23 1/4”
181 cm x 91 cm x 59 cm
Bathing Well
48 1/2” long
24” wide
21 3/4” interior depth
Shipping Weight
245 lbs. / 111 kg
Tub Weight Filled
868 lbs. / 394 kg
Tub Only Weight
126 lbs. / 57 kg
Gallons to Overflow 90 gal. / 341 L
electRIcal SPecIfIcatIonS:
Pump
1/15 HP; 1.3 AMP; 110V
Heater
1.5 kW; 12.5 AMP; 110V
Requirements
20 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
•
Chromatherapy LED Lighting*
•
Comfort Pillow - Oval or Rectangle
•
Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•
Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
•
Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit
Only)
•
Factory Installed Rigid ABS Tile Flange
•
Color Matched Acrylic Skirt
•
Premium Colors
All acrylic colors featured by Aquatic match the industry’s
leading fixture manufacturers.
*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
oPtIonal equIPMent:
aquatic quality features:
- 1.5 kW Inline Maintenance Heater
-
Run-Dry Pump with 20-Minute Timer
- 2 Circulation Portal Covers
- Bath-S
ide On/Off Electronic Button
-
“Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation
- Raised Seat
- Slip Resistant Floor
- 2 Arm Rests
-
Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Heat-bent R
igid PVC
Piping for Optimum Sanitary Conditions
-
Durable, E
asy to C
lean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
StandaRd equIPMent:
fax-on-demand
document # 1237
21 3/4”
20”
36”
36”
23 1/4”
71 1/4”
1 1/2”
10 1/2”
Deck Width 2”
