3.Controlling the light bulbs or power outlets using the NHL 21-Button Keypad
There are 21 buttons on the keypad.The top 9 scene buttons will correspond to the 9 preset
scenes that you have created in the iHome Kits app.The other 12 buttons can be set to control
the dimmable LED lignt bulbs and the plug-in power outlet.
To pair the LED Bulb or Power Outlet with the keypad,set the ‘On’ switch on the keypad.The LED
indicator will blink red.
Hold any of the 12 control buttons until the light begins to flash.
Once the light begins to flash,power off the bulb and power it back on again.
Once the red light begins to blink again,release the button on the keypad.
Test the functionality.If the paring is unsuccessful,please repeat the steps listed above.
Note:Please add only one device at a time.
4.Creating Scenes
Enter the room that you would like to control.
Using the ‘iHome Kits’ app,proceed to the scenes page.
Press and hold the scene button to save your current scene.You can also rename the current
scene.
5.Accessing the Device List
The device list will give you access to each of the devices connected to your home network.
Press the ‘Option’ button in the ‘iHome Kits’ app and select ‘Device List’ .
View the device list and click on the desired device in the control panel.
6.Adding Files for Backup & Recovery
For Android Users
1.Press the ‘Option’ button in the ‘iHome Kits’ app and select ‘Backup’ to save the current
settings.
2.There are 2 files in Document/Devices Storage/iHome,’ihome_db’& data.xml
3.Copy the 2 files to another Android phone and replace the previous ones,then press the
‘Option’ button in the ‘iHome Kits’ app and select ‘Recovery’ to show all of the presets.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
