Serenity Series
YELLOW;
GREEN;
return to
SLOW RAINBOW CYCLE.
·
CG02
BLOWER
+
LIGHT
ELECTRICAL
FEEDER
120V
120V 15A
GROUND FAULT
CIRCUIT INTERRUPTER
CLASS A
JUNCTION
BOX
NEUTRAL
LINE
GROUND
WHITE
BLACK
GREEN
WATER DETECTORS
(OPTIONAL)
MAIN BLOWER
HEATING
ELEMENT
120V/0,5A MAXIMUM
LIGHT
KEYPAD
WATER
DETECTORS
CO
NNECTION
KEYPAD
1 ON/OFF BLOWER
1st Press:
The blower starts
2nd Press:
The blower stops
2 BLOWER SPEED VAR
Press & hold to increase the blower speed
Release pressure at the desired speed
3 BLOWER SPEED VARIATION -
Press & hold to decrease the blower speed
Release pressure at the desired speed
4 PULSATION MODES
1st Press:
Wave - Speed will vary
gradually from maximum to minimum
2nd Press:
Pulse - Speed will go directly to
minimum and then straight back to maximum
3rd Press:
Returns to maximum speed
5 ON/OFF LIGHT
1st Press:
Light ON - WHITE
2nd Press:
Light OFF
Turn OFF and ON within 3 seconds the light will change to:
SLOW - RAINBOW CYCLE;
FAST - RAINBOW CYCLE;
TURQUOISE;
BLUE;
MAGENTA;
RED;
ORANGE;
STANDARD DRYING CYCLE
An automatic drying cycle will start 20 minutes after
the blower is turned off.
STANDARD DRYING CYCLE WITH WATER DETECTORS
They activate a drying cycle 20 minutes after the bathtub
is emptied and thus even when the blower was not used.
24H PROGRAMMABLE DRYING CYCLE
The system must be stopped prior to activation or deactivation.
Activation:
Determine at which time you wish the purge to activate.
At that precise time, press and hold the second button on the
keypad for 5 seconds. The purge cycle will now start at the
programmed time every 24 hrs. In the event of a power failure
the program will be automatically deactivated.
Deactivation:
press and hold the second button on the keypad
for 5 seconds.
DRYING CYCLE OPTIONS
Summary of Contents for SERENITY W6AIR6060
Page 86: ......
Page 87: ......
Page 88: ...Customer Service 800 945 2726 aquaticbath com 8MANDBTH 01 17...
