28 Aquatic
Serenity Owner's Manual & Installation Guide
INSTALLATION INSTRUCTIONS
NON-FREESTANDING MODELS
REMOTE CONTROL OPTION (NON-FREESTANDING) (CONT.)
Remote Control Installation
The following components are necessary
• 1 remote control
• 2 magnets
• 1 receiver module
• 1 cable
1. Determine the appropriate location for the remote
control in the bathtub.
2. Determine backside location of magnets
A. Hold the remote control in the chosen location.
B. From the exterior of the bathtub position the supplied magnets,
the attraction force will guide you to the proper area and they
will hold in place.
C. Mark the position of the magnets with a marker or pencil.
CAUTION: Magnets always have a positive and negative side and
will only be attracted to one side. Consider this to avoid applying the
silicone to the wrong side.
3. Install magnets on back side
A. Apply a dab of silicone to the magnets, place and maintain
in the premarked position.
B. Let dry in this position.
WARNING:
The magnets are extremely powerful despite their
small size. Use caution while installing and handling to avoid injuries
caused by a sudden movement of the magnets clinging together
and possibly pinching fingers, skin or other. Persons with physical
conditions that could be affected by magnetic fields should avoid
using it and/or consult with their physician.
Magnet Installation
Figure 9A
Figure 9B
